Why We Do We Love Double Glazing Seal Repairs (And You Should, Too!)
Double Glazing Seal Repairs
If the seals of double glazing windows have been damaged they could cause damp and mould. This could cause damage to the frame and walls surrounding it and can affect your health.
Fortunately, most uPVC windows can be repaired by sealing and resealing instead of replacing. A glazier is usually able to clean the frame of the window and the glass, apply a new bead of sealant, then smooth it.
Water Leaks
Window seals are made to prevent water to stay out of your home. When they start to wear down, water could be leaking around your windows. Not only is a leaky window annoying however, it could also cause costly structural damage to your home's structure. It is essential to recognize the issue early and get it fixed by a professional before it worsens.
Often, the source of the windows that leak isn't in the glass itself but rather on the frame and sill. A leak in this region is the most common indication of a failing window seal. It can be caused by damage to the window seal due to weather or aging, worn-out caulking or a blocked drainage section resulting in a build-up of ice or water.
Another indication of a failing window seal is water appearing in between the panes of your double-glazed windows. This isn't as hazardous as a leak of water because the water does not travel far enough to get into your home. It does mean, however that the inert gases that are sandwiched between your panes have leaked out. This can reduce the insulation value of your window.
Condensation between the panes is another common sign of a failed seal. This could be caused by an ineffective seal or a damp environment within your home. It could also be a problem with the glass. The condensation might not just be irritating but it can also cause the development of mildew and mould in your home which is difficult and costly to get rid of.
It's time to check your double-glazed windows if you observe these signs. Repairs or replacements will help protect your home from water leaks, cut down on energy costs, and even prevent drafts. It's a small expense to ensure your family's comfort and safety. Contact Thompson Creek Window to discuss your options regarding window seal repair or replacement. Our staff is always ready to assist! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A broken seal for double glazing can allow water to get into the gap that is used to insulate. This water can cause fogging or misting to the window panes.
If you notice condensation developing within your home, it's the perfect time to call an experienced double glazing repair service. The condensation is a sign that the seal created by the factory has failed and water is leaking into the insulated gap.
Condensation can be caused by variety of factors, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. As a result, there are a few different double glazing repair options but it is essential that the new seal is correctly designed to ensure a perfect fit and a water-tight seal.
Typically, the gaskets that are used to seal the gaps between your double-glazed units are made from polyurethane foam. They are designed to last for a long time, but can be damaged over time because of natural wear and wear or exposure to fluctuating temperatures and weather conditions.
As time passes the foam may shrink or crack. This creates a gap in the seal, which allows moisture to creep into the double-glazed windows. This can lead to condensation and a loss in energy efficiency.
Re-sealing the windows is one option to address this issue. This isn't a 100% solution since it will only remove the existing condensation and not address the issues that cause the double-glazed windows to leak or create condensate.
Another solution is to have your windows replaced completely and this should be handled by a professional that offers an insurance backed guarantee. If the company fails, you are still protected by insurance. It's important to note that your replacement windows should have a warranty of at least 10 years.
Misting
Verify that your double-glazing seals are in good condition as the autumn season draws near. Seals that have worn out can affect the insulation properties of your windows as well as cause condensation, mold and dampness. To avoid further damage to your double-glazed windows, and to save money on energy bills It is important to address any problems as soon as you can.
Double-glazed windows are constructed of two glass panes that are held together by a gas-filled interior space. The sealant layer on the outside fills the gap between the uPVC frames and the glass. This is vital to ensure the air-tight seal which keeps warm and cold air separated in your home, saving you the cost of heating. Unfortunately, over time these seals may fail due to age, weather conditions or even inadequate installation. The magic insulation formula which makes double glazed windows so efficient can start to lose its effectiveness as soon as this occurs.
If left unchecked, damaged or faulty seals could lead to condensation and damp that can not only affect the appearance of your windows, but could also affect your health. Moisture and dampness can cause damage to walls, ceilings, floors and other surfaces within your home. They can also cause allergens and irritants that can be detrimental to your health and the health of your family members.
The most frequent issue that double glazing suffers from is misting between the panes. This occurs when moisture is able to get into the insulated area of your window. It is very difficult to fix without professional help for repair of the seal on your double glazing.
There are DIY ways to deal with this problem, however, we'd recommend against this as it's not only risky but also extremely hazardous and damaging to your windows. These methods involve drilling into your glazed unit and using chemicals to get rid of fog and condensation. This could lead to a variety of complications, including exposure of your windows and units to water damage.
Repair My Windows And Doors possess the tools and skills to safely seal uPVC frames. They also can offer you long-lasting results. They can also give you suggestions on how to properly keep your uPVC window in good condition to avoid problems in the future.
Draughts
A draft coming from your window indicates that the sealant may have been damaged. It needs to be repaired or replaced. This will block cold air from entering your home. It will also increase efficiency in energy use, decrease heating bills, and increase the comfort of your home.
It is important to note that some draughts are not caused by the window seals but rather from the gap between the frame of the bricks. In certain cases it may be possible to fix this by filling the gap with silicone caulking. If this is not successful it will require resealing professionally.
When the sealant on the double-glazed window begins to degrade, it allows for water infiltration and can lead to damp or even mold in some instances. This can then have a negative impact on health and can be very damaging to property. It is crucial to take care of any water leaks immediately you notice them and if your windows are still under guarantee it is worth contacting the company that you purchased them from, as they might pay for the repairs.
It is important to determine whether the windows are covered by a warranty. Some companies offer lifetime guarantees and others offer 10 years. If your double-glazed windows are under warranty, it's worth contact the company you bought the windows from as soon as you can and giving them the details of any issues you are having. It is best to reach the company in person or via email and letter. This will ensure that everything is recorded and clear.
It is also worth noting that draughts may be caused by damaged hinges, rather than a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but can become stiff over time if they are not regularly oiled. This could cause a gap to be created between the sash frame and the sash, which lets cold air into the house. This issue can be resolved by replacing the hinges without impacting window seals.